Consistency and efficiency go hand-in-hand and this is why we created the CORNER FENCE BLOCK. The product is part of our work locating family and features a precision bored 0.250" dowel pin and an M6. Both of these features can be used to flip or secure a part during routing in addition to the block's primary function.
These blocks feature machined flat and parallel faces for the best reliability and fit closely into the T-slot bed (very little wiggle room - that is a good thing)
NOTE: These blocks are slightly higher than the MDF board. This is intentional so that they work as a fence. However, when using them as a flip aid, your stock will need to rest on additonal blocks (you can purchase more if needed) with a small shim in the bottom if needed (not provided). This is in a similar fashion as to how material stock is held "floating" on a vise.
CORNER BLOCK (SINGLE FNF CORNER BLOCK)
- Only compatible with Carbide 3d's Shapeoko 4 and PRO hybrid tables.
- T-nuts are not included - these are meant to be used with the ones supplied with your CNC machine.
- Be sure to select the hardware option if needed, otherwise, you will need to supply two BHCS M6 x12 to attach the FNF BLOCK to your table.